How to record video directly to an external SSD on iPhone
Connect the SSD, choose a folder on it in LongTake, and press record. Video is written directly to the drive, so it doesn't fill your iPhone. Apple's own Camera app does this for ProRes only, on its USB 3 models: iPhone 15 Pro and later Pro models, and iPhone Duo. Some third-party camera apps record regular video to a drive, LongTake among them.
Set it up in LongTake
- Connect the drive and unlock your iPhone.
- Open the Files app and check that the drive appears under Browse › Locations.
- In LongTake, open Settings › Storage and choose a folder on the drive.
- Wait for External drive, ready. If it says This device, ready, the drive isn't connected and the take would go to the iPhone.
- Record a short test, then play it back from the drive.
External recording needs LongTake Pro, a one-time purchase, and iOS 18 or iPadOS 18 or later.
What you need
- An iPhone or iPad that shows the drive in the Files app. See the table below.
- An SSD formatted exFAT or APFS, with a single partition. Here's how to choose.
- A USB-C data cable. The cable in the iPhone box is USB 2 speed, which is enough for HEVC on paper but not for ProRes.
- A powered hub if the iPhone says the drive requires too much power.
Which iPhones can do it
Summarized from external recording by iPhone model, which links Apple's spec page for each.
| iPhone | Port | Apple's Camera app to a drive | LongTake to a drive |
|---|---|---|---|
| 15 Pro, 16 Pro, 17 Pro, 18 Pro | USB-C, up to 10 Gb/s with a USB 3 cable | ProRes | Yes, with Pro |
| iPhone Duo | USB-C, up to 10 Gb/s with a USB 3 cable | ProRes, per Apple's USB-C page | Yes, with Pro |
| 15, 16, 16e, 17, 17e, Air | USB-C at USB 2 speed | No | Yes, with Pro. HEVC needs far less than USB 2 carries |
| Lightning iPhones that run iOS 18 | Lightning, with an adapter | No | Untested. Power is the usual problem |
Apple's ProRes page lists only the 15 Pro to 18 Pro for external ProRes; its USB-C page adds iPhone Duo. We haven't tested ProRes on iPhone Duo.
For iPad, see recording to a drive on iPad. Every USB-C iPad has enough bandwidth for HEVC on paper.
What LongTake checks
- Speed. It measures the drive before each take. If the drive is too slow for your format, it says so before you start.
- Space. It checks free space on the drive.
- File limits. On FAT32 it starts a new file before the 4 GB limit.
If the drive is unplugged, the take stops and finished parts stay on the drive.
If the drive isn't connected when you press record, LongTake records to the iPhone instead, without asking, and keeps the drive chosen for when it's back. Check the storage line before a take that matters.
Cable and power
- Cable. For HEVC, any good USB-C data cable works. For ProRes, Apple asks for a USB 3 cable of at least 10 Gb/s.
- Power. For ProRes, Apple lists drives with a maximum power draw of 4.5 W. If the iPhone says the accessory needs too much power, Apple's guide suggests a powered USB hub.
- Charging on long takes. A powered hub with pass-through charging can feed the drive and the iPhone from one supply. Check the hub's specs, and test it before an event.
- Strain. A cable that moves can disconnect. Clip the drive to the tripod or rig and leave some slack.
If the drive is too slow or disconnects
| What happens | Likely cause | Try |
|---|---|---|
| LongTake says Too slow for this format | The drive or cable can't keep up | Lower the resolution or frame rate, or use a faster drive and cable. What speed you need |
| The drive doesn't appear in Files | Locked iPhone, format, partitions, cable or power | Work through iPhone not recognizing an SSD |
| "Accessory requires too much power" | The drive needs more than the iPhone supplies | A powered USB-C hub, or a drive that draws less |
| The take stops part way | The drive was unplugged, lost power or got hot | Secure the cable, add a powered hub, keep the drive out of the sun |
| A part won't copy to a USB stick or another drive | The destination drive is FAT32, which can't hold a file over 4 GB | Copy to an exFAT or APFS destination instead, or split at 2 GB next time. If you reformat the destination, that erases it, so copy off anything you need first. Which format to use |
Other apps that record to a drive
We make LongTake, so read this with that in mind. Each line comes from the app maker's own page, checked 17 November 2026.
- Apple Camera: records ProRes to an exFAT drive on the iPhone 15 Pro to 18 Pro models, and on iPhone Duo according to Apple's USB-C page. It needs a USB 3 cable and a drive that writes at least 220 MB/s for 4K60.
- Final Cut Camera: Apple's guide says it can record directly to an external SSD on iPhone 15 Pro or later. That guide describes ProRes formats.
- Blackmagic Camera: its tech specs list saving clips to internal or external storage, with HEVC and H.264 among its codecs depending on the model.
- LongTake: records HEVC or H.264 to a drive with Pro, splits the take into parts as it goes, and tests the drive before each take.
For split and black-screen features across apps, see apps that split video while recording.
Questions
Can I record to iCloud Drive or Google Drive?
No. Those folders are online, so LongTake can't record to them directly. Record locally, then export.
Can I record to a USB flash drive?
If it shows in Files and passes the speed check, yes. Cheap flash drives often slow down during long writes, so test first.
Do I need ProRes to record to an SSD?
No. ProRes is what Apple's Camera app needs a drive for, because its files are so large. LongTake records HEVC or H.264, which are much smaller, so the drive mainly gives you space.
What happens if the drive fills up?
LongTake checks free space before each take and keeps checking during it. When the drive reaches a reserve that LongTake keeps free, the take stops safely and the parts already finished stay on the drive. A stop rule at a total size, from 500 MB to 100 GB, also caps how much one take can use.
Updated . Written by Ashutosh Kumar, who makes LongTake.