What write speed do you need to record 4K to an external SSD?
4K HEVC needs only about 3 MB/s, so almost any SSD is fine for recording to an SSD. ProRes is the hard case: about 73 MB/s for ProRes 422 and 110 MB/s for HQ at 4K 30 fps. Double those for 60 fps. What matters is sustained speed, not the peak on the box.
The numbers
Per-minute figures are Apple's. MB/s is our conversion, at 4K 30 fps.
| Codec | Per minute | Speed needed |
|---|---|---|
| HEVC | 175 MB | 3 MB/s |
| ProRes 422 | 4.4 GB | 73 MB/s |
| ProRes 422 HQ | 6.6 GB | 110 MB/s |
Apple's Camera app asks for drives that hold 220 MB/s for 4K 60 and 440 MB/s for 4K 120.
Why the box number misleads
Fast drives use a short burst of fast memory. Once that fills, writing slows. The Crucial X9 was measured at 50 to 60 MB/s after its cache, and a Samsung T7 Touch at about 300 MB/s after 25 GB. A long ProRes take runs right into that. An SD card rated V30 only promises 30 MB/s.
What LongTake does
It writes a short test to the drive, works out what your format needs, and tells you before you start. If it says Too slow for this format, lower the resolution or frame rate, or use a faster drive and cable.
Questions
Does heat slow a drive?
Yes, it can. Keep the drive out of the sun, and test a long take before a real shoot.
Is a USB flash drive fast enough for 4K video?
For 4K HEVC, usually: it needs about 3 MB/s. For ProRes, rarely: many flash drives can't hold 73 MB/s for long. LongTake tests the drive before each take.
Is USB 2 fast enough?
For HEVC, yes on paper. USB 2 tops out around 60 MB/s before overhead, far more than 3 MB/s, but it's too slow for ProRes HQ. See iPhone models and port speeds.
Updated . Written by Ashutosh Kumar, who makes LongTake.