How to record a full concert or gig on iPhone
Ask the venue first. For a full set, plug in, use a tripod, and split every 30 minutes. Phone mics struggle with loud bands, so take a line from the desk or record sound on a second device. Three hours of 4K at 60 fps takes about 72 GB, so use 1080p or an external SSD.
Permission first
Many venues, festivals and artists don't allow recording, and ticket terms often say so. If you're in the band, check with the venue and the other acts on the bill. Filming in a cinema is illegal in many places.
Storage for a 3-hour set
Estimates from Apple's commonly quoted per-minute figures. Real files vary with the scene, and busy light shows can make them bigger, so leave room to spare.
| Format | 2 hours | 3 hours |
|---|---|---|
| 1080p 30 fps | About 7 GB | About 11 GB |
| 4K 30 fps | About 21 GB | About 31 GB |
| 4K 60 fps | About 48 GB | About 72 GB |
An external SSD keeps your iPhone free. It needs LongTake Pro.
Loud sound
A phone's mic is built for voices at arm's length. In front of a PA it can distort, and you can't fix that afterwards.
- A line from the mixing desk gives the cleanest sound. Ask the engineer for a spare output, and bring an audio interface the iPhone accepts. Test it with LongTake at soundcheck.
- A separate recorder at the desk works too. Clap once in view of the phone at the start, then line the sound up with the video in an editor.
- A separate recording also covers the joins. There can be a brief transition where one video part ends and the next begins. A continuous audio track laid over the parts in an editor hides it.
Stage lights and the picture
- Lock exposure and white balance so the picture doesn't pump and shift colour with every lighting change. LongTake's manual controls are free.
- Banding or flicker. Some stage and LED lights flicker. Camera makers suggest a shutter speed that matches the mains supply, about 1/50 s for 50 Hz or 1/60 s for 60 Hz. Set it by hand in LongTake and test at soundcheck.
- Keep the phone out of the lights. Stage lighting heats a phone fast, and heat is the likely limit. Take off a thick case and use 30 fps.
- Dark Screen (Pro) hides the bright phone at the side of the stage.
Rehearsals
For a rehearsal, record the whole session and sort it out later.
- 720p is free and is usually enough to review timing, parts and stage moves.
- Split every 10 or 15 minutes. Note the time each song starts, and you'll know which part to open.
- Set a stop rule of 2 or 4 hours, so nobody has to remember to stop it.
- Share one part with the band instead of the whole session.
Settings for a gig
| Setting | Choice |
|---|---|
| Resolution | 1080p 30 fps for most gigs; 4K with an SSD |
| Split | 30 minutes, or 1 hour for fewer joins |
| Stop rule | 4 hours |
| Audio | On, as a guide track, even if the desk feed is the real sound |
| Airplane Mode | On, so a call doesn't end the take |
Questions
Is there a gap between parts?
There can be a brief transition. If you plan one continuous film, use a long split interval, record the sound separately, or cut between parts at gaps in the music.
How much space does a 2-hour concert take?
About 7 GB at 1080p 30 fps, 21 GB at 4K 30 fps and 48 GB at 4K 60 fps, as estimates. Real files vary with the scene, so leave room to spare.
Will an iPhone overheat recording a whole concert?
It can, especially under stage lights or in the sun. Take off thick cases, keep the phone out of the lights and use 30 fps. More in iPhone overheating while recording.
Updated . Written by Ashutosh Kumar, who makes LongTake.